Hp Photosmart 7520 Replace Paper Feed Rollers

Photosmart 6520: paper feeding problems

• When hpeprint printing, printer attempts / try to print but the paper will not feed.  Paper will feed when you use copy or any other function by using the display panel.  Went through all suggested troubleshooting procedures.  Hpeprint works on a different printer that I have.

using hpeprint and I am trying to print the microsoft word document and other items from the internet.    I can print to the second printer using hpeprint account with no problems.  both printers are listed as being recognized by HP account during account review.  both printers are HP.  and test the printer works OK

HP psc 1200: psc1200 paper feeding problem

will not load paper, rolls move but don't feed

Hello @Apache655,

Welcome to the HP support forums.

I understand that your PSC 1200 does not feed paper.

I would like to help.

Paper can leave a very fine dust on the reels. This can prevent the rolls 'capture' the paper.

I recommend that you clean the rollers.

Dust, fiber, paper and other debris may accumulate on the pick rollers and cause paper feeding problems. To avoid paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped).

Photosmart 7520 - paper size

Hi all

I bought the HP Photosmart 7520 because I was told that it would print on my greeting cards. The cards are 5 inches wide and 11 inches long.

Unfortunately, I can't seem to get the printer actually do this? I'm doing something wrong or is this format too smalll for this printer?

If the printer is bad, please can I get some tips on what you actually buy?

Thank you inadvance.

Cassie79

Take a look at this linkApple.

The Officejet Pro8500 paper feed problem

The paper feeder does not book directly by moving into the printer.  He also sometimes chew the edges of the paper which it passes.  I followed the advice provided in the manual about to clean the rollers and pad and reset the printer.  I have also assured the paper is correctly aligned in the status bar.  Does anyone have advice?   Thank you.

Remove the rear door and look at her with a flashlight.

Photosmart HP 7510: paper feeding problems

Power paper on top for scanning or printing is always looking for another document to feed even when there is none of the documents to scan or copy. So I never scan to complete - it shows like a jam.

Hi hedgejo,

Thank you for your answer!

This doesn't seem to be a malfunction of the printer itself material for sure. Right now, I would recommend to Contact HP telephone support for your hardware options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

Best regards!

Photosmart 7520: Paper and possibility of selection of quality always change to the photo paper

I'm unable to select different types of paper and print quality.
whenever I choose another paper automatically return to advance and normal quality hp photo paper.
If for example I change quality printing at best on plain paper automatically become Hp advanced photo paper.

Any help please? I am very frustrated

Hey @antonello2,

Welcome to the Forums of HP Support!

I understand that you have some problems with printing to your Windows 7 PC to your 7520 Photosmart e-all-in-one printer. I can help you with that.

To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

1. If the printer is connected to your PC via a USB cable, remove it.
2. Close any programs you have open.
3. Click on start and open devices and printers.
4. Right-click on any icon of your printer listed.
5. Click on remove the instrument.
6. Repeat for all other icons of your printer listed.
7. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a new queue for your printer.

Please let me know if this allows you to change the paper settings. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

Photosmart 7520 copy/fax problem

Hello. I have a photosmart AIO nine 7520 which, so far, works very well. It suddenly stopped doing the 'sound' when I load paper into the feeder at top of the page to make a copy or send a fax. It is used to operate a Bell to let me know that it detects im paper loading. And that's not all. When I send a 1 or a fax of 2 pages or try to make a copy of page 1 or 2, once the second page is going through, the Manger continues to turn and make a noise loud enough as it is trying to feed another piece of paper that is not there... and the error comes "original weakest error". Ive tried all the FAQ told me to do and it still does not work. In fact, I got the chimes to come back earlier today for a bit, but it was always do the same thing. try to take more of paper that is not there and that the error. This has never happened before, I have not changed the settings, please help, thank you.

Try to clean the rollers on the artery. Here is a link that can help you with that.
http://goo.GL/snx2Q

HP Officejet Pro 8600: paper feeding problems

Help!   My printer has all of a sudden decides to try to feed a bunch of paper at the same time, ruining the leaves.  May 6-12 pages.

I don't know the terminology to search for this problem.  There are times when paper changes (for example the new color), but not always.  Hate waste, hate to lose the County. Should I clean something?

Welcome to the HP community @macandsons!

I came across your message on several pages of food through your Officejet 8600 and wanted to pop in to help. I would like to see you link below and try the steps in the order for that matter. Generally a good cleaning roll will help this type of concern. If you still find the printer pull in several sheets of paper, then I recommend finally call phone support to talk of a replacement printer.

More than one Page at a time feeds through the printer

If you have trouble, let me know and I'll do my best to help.

Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

Have a nice day

HP technical support are available by clicking on the following link:

http://h22207.www2.HP.com/us-en/?openCLC=true

(1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

(2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

(3) Once finished, click the "Show Options" at the bottom right.

(4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

OfficeJet Pro 8610: Paper feeding problems

Is it possible to manually feed a single sheet of paper in the 8610?  I have sheets simple manual power in my old Lazerjet 4Plus and find it convenient if I use 'good side paper '. (reuse, recycling)

@Arnot41

Welcome to the Community Forum of HP.

I don't think you can "unique paper source" in this printer.

Part of the problem could be the way the printer picks up the paper - the mechanism (rollers, power, sensors) - must be "so" or something can glitch and you might get an error any.

Assuming that the paper is the same quality paper that could be used in the printer in any case, it is standard 20 # bnd, white paper, or another high-quality brand HP or equivalent, then the following should work:

You might be able to 'good use' book on top of new paper in the tray from the stack and use it that way.  If the printer not to panic because of the paper with something printed on the back of the paper, it should work.

Stack the paper into the tray with the clean side to print "hidden face".   This means that the 'already printed side' will be visible when the paper is in the tray.

You can try it certainly - if the printer doesn't like it, it will tell you on this subject.

The 8630 Pro OfficeJet print on paper one side "already used" - I just tested.

When you see a post that will help you,

Who inspires you, gives a cool idea,

Or you learn something new.

Click the 'Thumbs Up' on this post.

My answer-click accept as Solution to help others to find Solutions and answers!

HP Officejet Pro 8500: Paper feeding problems

Why my printer HP Officejet Pro 8500 has constant pain to pick up the first sheet of paper, when the 'Print' is selected.  He invariably through a blank sheet and then gives the message "on paper" when the paper is in the tray.  It's same with envelopes.  Frustrating!

The troubleshooting in the here document steps can help solve problems loading the paper in the printer Officejet 8500.  Please go through all the steps in order.

OfficeJet Pro 8620: Paper feed problem

New Machine - age for a day. Follow the installation procedure and a tray loaded with good paper 20 # 8-1/2 "x 11". When I send a print job to the printer - the finished sheet is great except for a double crease to the top of the sheet. It's as if she gets stuck, deform the sheet and then it ends. It is not appropriate for an office environment.

This printer has a duplex on the back unit.

Secondly when I put the tray paper for 4 X 6 photo paper and load the tray... it won't pull the paper and printing. The error message says to check the configuration of the status bar and load the paper - I have already done.

HI @Scott18,

Welcome to the Forums of HP Support!

I understand that your day an old printer HP OfficeJet Pro 8620 is the rustle of paper and do not print on paper 4 x 6. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

I can certainly understand how it would make you questions in an office environment. Looks like it's that a barrier inside the printer or a roller is defective.

To try to fix the problem, I suggest that take a look deeper inside the printer with a flashlight to see if you can determine the cause.

Please, try the steps in these guides:

• Displays a Message "paper jam".
• Displays a Message 'Transport Jam'

NOTE: Some steps several times may help solve the problem.

If you have completed all the above steps and your product still has a problem, service the product. If the printer is within the buyers remorse period, put the printer in the point of sale or contact HP.

Contact HP for service in all countries except Asia-Pacific.
What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on: contact HP options - click Get phone number
File number and phone number are displayed.

Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

HP office jet pro 8000: paper feeding problems

Hi all

I have a used HP 8000 printer and it will not pick up and feeding of the paper.

I cleaned the rollers, re started the printer by following troubleshooting instructions...

I also watched the pickup rollers as they go down, and they move into position, .but they won't pick up the paper.

Is it perhaps a fit I could do myself?

Thank you

Kenneth

Thanks for the reply, Jamieson.

I did everything you suggested, ecept the firmware.

But I leave windows 7 download the internet application... I sssume they picked up later?

I have a CD with it, but it's probably outdated...

Anyway... I will try once again and I hope I'll be able to use it and do not have to sell...: {) ~}

Photosmart 7520: cartridge printer problem

There are 5 locations of the cartridge in the printer, and I never had no problem with cartridges before that.  Four of the five slots hold what I describe as 'slim' cartridges - 3 color, black. The fifth housing contains a cartridge slightly wide, black - 564/XL with an icon that looks like a hexagon.  I put all the cartridges match to their icons. The combo or one package of 564/564XL I bought do not contain the black cartridge "slim."  Icon on it looks like the 'open doors' on a lift - in opposing arrows. 564/XL certainly does not fit the slot (position left-most). So while 4 out of the 5 was inserted and "snicked" well put, I get the message 'lack cartridge' and I get this - I am missing a cartridge! I'll go back to the store and ask for help, but what don't get me? I bought the combo packs before and got just what I needed.

Hi @JMA1961,

Welcome to the Forums of HP Support!

I understand that you did not correct black cartridge in the pack that you bought. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

I understand how frustrating it must before you. To clarify, it depends on where you buy the combo pack, if she would have the black cartridge include. Please check the box for more details.

NOTE: Depends on the retail store, whether or not it would be included.

• The cartridge that described you as "open doors on a lift" is the black photo cartridge, which has the symbol bowtie on him. This cartridge can only fit on the side of the extreme left of the printhead.
• The cartridge on the right side is the main black cartridge that has the shape of a Pentagon on the subject.  This cartridge only fits on the far right of the print head.

Photosmart D7560: The Photosmart D7560 no paper feed

I bought my printer a few years ago and I have not much used.  I tried to use it today and the paper will not feed.  I tried to adjust parameters, thinking that it would work and still no results.  I even tried the cleaning mechanism cartridge and he gave me the same answer, ' load paper '.  I don't know what is happening.  Help, please.

Welcome to the HP community @TWhite1980 !

I saw your post on the 'paper feed problem' you meet with your Photosmart D7560 printer, and I want to help! I would like to start working on this problem of cleaning of the rollers in the printer, as over time, dust and paper debris can build up on the rollers and create this exact problem, you have a.

To see the proper instructions on how to clean the rollers, click on this link and scroll to the bottom for "third step: clean the rollers ' and follow the steps. You can also try to reset the printer and control of any document that you will see in this guide. (Also use standard simple letter to test print paper size or the copy after you are done troubleshooting).

A Message appears 'jam or jam' for printer HP Photosmart D7560 h

Please write me back and let me know the result!

jorgensentherser.blogspot.com

Source: https://www.eehelp.com/question/photosmart-7520-paper-feeding-problem/

Share this post